Stainless Steel high flow tri clamp pneumatic block type diaphragm valve with epdm+ptfe
The sanitary diaphragm valve is remotely controlled by the driving actuator or manually operated by a handle.It has the advantages of simple structure, beautiful appearance, quick disassembly , flexible operation, less fluid resistance, and reliable application, etc.
Description
Manual diaphragm valve is consisted of handle, diaphragm,bonnet, screws and valve body. Actuated diaphragm valve is consisted with an actuator and the manual diaphragm valve.
Manual handles are available in plastic grade and stainless steel grade .
The driving actuator has different types: normally closed type, normally open type and electrical type.
The pneumatic actuators are available with plastic, aluminum or stainless steel grade.
The electrical actuator is available in plastic grade.
Both manual operated and actuated driving type can ensure the use in hygienic or corrosive environmental conditions. Manual diaphragm valve is a valve with extremely small dead angle, and throttling is valve body can achieve function , and also can realize high flow and wide range of uses.
The actuator features a compact and high pressure sterilization design.The actuators are optionally available with travel limiters and position feedback sensors.
Working Principle
The sanitary diaphragm valve separates the inner wall of the upper and lower valve body of the diaphragm, so that the valve stem, valve disc and other parts above the diaphragm are not corroded by the medium, the structure of packing seat assures there is no-medium leakage. It not only ensures the purity of the working medium in the pipeline, but also prevents the medium from the working parts in the pipeline. In a diaphragm valve, since the working medium is only in contact with the diaphragm and the valve body, both of which are the food grade FDA approved. The valve can ideally control a variety of working mediums, especially those with chemical corrosion working medium.The diaphragm valve body and gasket with the tight fit to provide the valve body seal and seat seal to ensure the pipeline inside and outside environment completely isolated.
Feature
Unique seal design, no dead angles
Absolutely sterile, no blind corner.
Stainless steel bonnet with sanitary internals
100% hydraulic tested / 100% inspected
Gentle material handling
Diaphragm 300000 times test
Diaphragm perfect match the valve body design
Valve operation more safe and efficient
The inner surface is RA0.4, which fully conforms to the pharmaceutical grade
Excellent for flow control,Straight through flow path
Easy disassembly, easy maintainenance, easy to clean, CIP
Low turbulence, Minimal back pressure
Unique sealing structure, eliminate the sanitary blind corner. Easy to clean the sterilization process and Contamination free.
Application
Diaphragm valves, manually or pneumatically operated, are specifically designed for use in sanitary and aseptic processes in the medical and pharmaceutical industries. Very good performance in controlling the flow rate of the small flow piping line. The valves are suitable for applying in high flow rate, high corrosivity, high viscosity fluid.
Technical design SPEC.
Max. working pressure: 10 Bar
Temperature range: -10° ~ +120°C or higher upon request
Sizes available: 1" to 6"
End connection: Clamp, Weld, Flange, Thread
Body material: AISI 316L
Body structure: 2 way, 3-way, Casting Tee type,U type,Forged Tee type, with draining port, Non dead leg diaphragm block valves
Seal material: single diaphragm EPDM,EPDM+PTFE bounded membrane , EPDM/PTFE 2pieces membrane
Operation: plastic or stainless hand wheel,Pneumatic plastic actuator,Pneumatic stainless steel actuator, Electric actuator
Surface treatment: Ra 0.4 ~ 0.8µm
Standards: 3A, SMS, DIN, ISO
JoNeng was established in July 2007, located in Wenzhou, China. Totally around 100 nos of workers and the factory Covers 6800m2.
We have three manufacturing factories under Joneng enterprise. Jiayuan is especially into elbow, tee, reducer fittings in both sanitary grade and schedule grade ; Lingdong is focusing into ferrule, union, sight glass, butterfly valves which are produced from CNC machines; Ezo is into manhole covers and small tanks.
We mainly manufacture:
Stainless steel butterfly valves, ball valves, check valves, CPM valves, diaphragm valves..;
Stainless steel sanitary & Industrial grade elbow, tee, reducer, ferrule, union fittings ;
Stainless steel sight glass, spray ball, manhole cover, flanges,strainers, filters,pipe clamps;
Stainless steel centrifugal pumps, CIP pump, emulsifying pump, rotary pumps;
The products are produced according to SMS, DIN, AS, BS, BPE, JIS,JIS, ISO,ANSI B16.5, ASME and other standards. They also can be customized. Our products have been exported to dozens of
countries and regions such as Europe, America, Middle East,Australia,Turkey, Iran,Thailand... more than 100 countries.
Joneng is approved with CE, PED, ISO 9001 quality management system. The products are complied with FDA certificate.
The product can be widely used in Dairy, Beer, Wine,Beverage, Food, medicine, Chemical,Water Treatment and other fields.
JoNeng always insist in "What we say, What we do". Our goal is to make a centennial factory.
3 PMI machines to inspect the chemical for raw materials, semi finished products and final products to avoid mixing issue.
1 nos of roughness machine to check the surface of the products.
- We keep huge stock for pipe fittings( stainless steel elbow, tee, reducers) , union, ferrules, butterfly valves, check valves, ball valves....so we can delivery the goods in fast way.
24 hours' action for quality complaints
For the stainless steel parts, we take 3 years guarantee without any excuse.Any quality complaints for our valves and fittings, please contact with us, a 24 hours' action is required.
√17 years experience
√6800m2
√100 employees
√100+countries
√1000+ partners
OUR PRODUCTION CAPACITY
| Production Lines |
Stainless steel sanitary pipe fittings' line, machining line, sanitary manhole line, |
| Product Range |
Sanitary butterfly Valve, sanitary diaphragm valve, sanitary pipe fittings, union, ferrule, sight glass, manhole cover, safety valve, sampling valve... |
| Year Established |
2007 |
| Factory Size in Square Meters |
5000M2 |
| NO. OF TOTAL STAFF |
130 |
| Production Capital |
8 000 000 USD |
| Detail capacity |
Manhole covers |
12000nos |
| |
Pipe fittings |
150000nos |
| |
Ferrules, unions, connectors |
200000nos |
| |
Diaphragm valves |
15000nos |
| |
Butterfly valves |
20000nos |
| Investment in Manufacturing Equipment |
750000USD |
| Details of equipment |
For machining parts
29 nos of LG Mazak CNC Machines
4 nos of local CNC machines
2 nos of automatic CNC center
12 nos of plain lathe
For pipe fittings
4 nos of press
3 nos of cutting machine
3 nos of chamfering machine
We also have the following quipments
4 nos of polishing machine
12 nos of grinding machine
3 nos of laser marking machine
3 nos of pressure testing machine
1 nos of temperature testing machine
3 nos of spectro instrument
1 nos of surface roughness device |
| Primary Competitive Advantages |
Strict inspection, honest business way, fast revert on order problem |
| Stocked materials |
Big quantity for raw forging of butterfly valve, diaphragm valve, ferrule, union, adapters, pipe fittings, clamps, sight glass, safety valve, manhole cover, |
| OEM Services Provided |
Yes |
| Design Service Offered |
Yes |
| Sales Volume |
6 000 000 USD |
| Export Percentage |
80% |
| MAIN MARKET |
USA, Germany, Hungary, Canada, Thailand, Holland, England, South Africa, Indonesia, Saudi, India, New Zealand, Australia, Middle East... |
| Own Brand Name |
JoNeng |
FAQ:
1. Are you a trading company or factory?
We are a manufacturer factory and we also have our own exporting license.
2. Do you have certificate ?
Yes, ISO, FDA, LFGB, CE, PED certificate . We also have some patents in design.
3. How do you control the quality?
In quality control ,the most important is to avoid material mixing .
In our factory , 3 spectro PMI machines are used in raw material warehouse, production plant, dispatch plant.
Pressure inspecting machine, PMI machines, RA roughness spector, hardness testing machine..... all machines help in inspection.
2 staff inspect during production in different sections
5 staff inspect the finished productions to avoid shortage, poor quality, mixing chemical....
4. If there is any quality problem, how do you solve it?
We are very proud that we never make one customer leave us. We are not 100% perfect, there is some quality problem.
Normally replacement, or compensation, or resend goods to customers as per the condition. To be discussed as per condition.
5. How long is your delivery time?
For normal products in 7-10 days; for bulk order, in 15-25 days. It depends.
6. Warranty time?
3 years warranty for all of our stainless steel products. Gaskets or the easy broken parts are not included due to the different application for customers.
7. Why trust in us ?
14 years in this industry . It makes us professional .Good credit in this market.
All of our machines are the assurance of our responsibility.
8. Free sample ?
Free samples can be provided for first cooperation under sincere cooperation.
9. What is the MOQ?
1pcs MOQ is welcome for starting cooperatoon
10.Material certificate ?
Material certificaite, mill certificate, pressure testing certificate, roughness certificate, measure certificate, RT certificate,... can be available, please declare when inquiry us.
11. More questions are appreciated.
){kind=link}